Top-Down Corner & Force Vectors
Click or drag anywhere on the racing line to scrub position
Synchronized Telemetry Traces (0% – 100% Corner)
Notice the "100 Points of Grip" crossover: As Lean/Steering rises, Brake Pressure must taper off
At 38% (Turn-In): The car still holds 68% brake pressure to pin the front axle down, while the bike has already bled off to 54% because lean angle is rapidly eating up the front tire's circular contact patch.
The Friction Circle (Traction Budget)
Combined G-Force Vector: √(Braking G² + Cornering G²) ≤ 100% Grip
Turn-In & Trail Braking Initiation (32% – 44%)
As you tip into the corner, you MUST trade brake pressure for lean/steering angle. Notice how the motorcycle bleeds brake off earlier and smoother than the car.
Motorcycle (Tarmac)
2 Round Tires • Hinged Steering Head
Keeping 54% front brake compresses the forks, shortening wheelbase and steepening rake angle so the bike points into the turn effortlessly. If you released the brake abruptly at turn-in, the forks would rebound ("pogo"), widening your radius and shrinking the front tire contact patch right when you need grip most!
Race Car (Tarmac)
4 Flat Tires • Fixed Wheelbase + Aero
Trailing 68% brake pins heavy vertical load onto the front axle (killing entry understeer) while unweighting the rear axle so the tail pivots around the nose toward the apex. Unlike a bike, if the front tire slightly exceeds 100% grip, it merely scrubs a few degrees of slip angle rather than crashing.
Backing Research & Citations
A textbook “friction circle” assumes a vehicle trades 100% longitudinal braking for 100% lateral cornering along a clean circular boundary. Empirical MotoGP/WorldSBK and GT telemetry show adherence envelopes that are anything but circular — and radically different between two and four wheels. Every trace and readout in this dashboard is mapped to the primary vehicle-dynamics literature and empirical datasets below.
Cossalter, Lot & Massaro (2011/2014) —
An interpretative model of g-g diagrams of racing motorcycles, Proc. IMechE Part D.
Heart/teardrop boundary: upright braking is pitch-limited by rear-wheel lift (stoppie
threshold ≈ −1.25 G street/track, −1.55 G with MotoGP aero), and
roll coupling forces braking capacity to decay quasi-linearly toward 55° of lean.
Milliken & Milliken (1995) —
Race Car Vehicle Dynamics (SAE) & Romanowski
(2018) — TrailBrake GT3/Formula telemetry.
Mushroom boundary: low hcg/L ratio prevents pitch-over, while aerodynamic
downforce (F ∝ v²) expands the
high-speed braking top of the envelope (−1.6 to −2.0 G).
Code (2010) &
Nick Ienatsch / ChampSchool (2019) —
Brake-pressure transducer telemetry studies.
A bike needs a 0.25–0.40 s progressive ramp so the forks (75–95 mm
travel), rake (∼2.2°) and trail (∼18 mm) can settle before peak pressure.
Cars spike under 0.1 s to maximize aero braking.
Pacejka (2012) —
Tire and Vehicle Dynamics, 3rd Ed., Ch. 11 (MF-MCTyre vs MF-Tyre).
Camber thrust (γ ≤ 55°) with tiny slip angles (α < 3.5°)
on bikes vs. slip-angle (4–8°) cars. Combined-slip weighting drops steeply on the tire
shoulder: bikes bleed brake at ∼1.5–1.8% per degree of lean added.
Massaro & Limebeer (2021) —
Minimum-Lap-Time Control of Motorcycles / Vehicles, Vehicle System Dynamics.
Free-trajectory optimal control: bikes shed 80%+ of peak brake before 45° lean to avoid
steering-torque tuck; cars hold 25–40% deep to the apex to pin the front axle and rotate.
Additional insight from Cossalter’s follow-up work: peak acceleration on high-power bikes occurs at moderate lean (∼15–25°), not upright — leaning lowers the effective center of mass and delays the wheelie limit. Contact-tracing of tire-shoulder combined slip is modeled on Pacejka’s MF-MCTyre high-camber formulation.
Core Mechanical & Physics Differences: Motorcycle vs. Car Trail Braking
Why you cannot brake a motorcycle like a car at corner entry
Car: Violent initial stomp (0→100% in 0.1s) to utilize aerodynamic downforce at high speed.
Bike: Progressive squeeze (first 5% loads forks, then ramp to 100%). Grabbing 100% with uncompressed forks locks the lightly-loaded front tire immediately.
Car: Wheelbase is essentially fixed; trail braking shifts vertical weight onto front tires.
Bike: Compressing telescopic forks physically reduces rake & trail and shortens wheelbase—turning a stable straight-line missile into a sharp-turning chassis.
Car: Wide flat tires turn via slip angle across 4 contact patches.
Bike: Parabolic crown tires turn via camber thrust at up to 60° lean. At max lean, the bike is on the very edge of the tire where longitudinal braking slows rotation and folds the front.
Car: Exceeding 100% traction while trail braking causes mild front understeer scrub or controllable oversteer rotation.
Bike: Exceeding 100% front traction at 45°+ lean tucked under brake load results in an instantaneous lowside crash.